This means that your Ophir displays never become obsolete - you can always add a new head and a new display to your system.

Smart displays available from Ophir Optronics are:

VEGA

• Color Screen Laser Power/Energy Display
• Compatible with all Ophir thermopile, pyroelectric and photodiode sensors.
• Rugged and compact handheld
• Illuminated keys for working in the dark
• Log every point at up to 4000Hz with pyro sensors
• Non volatile data storage up to 250,000 points
• Clear screen color for work with laser safety googles.

Nova Handheld Displays

• Unprecedented performance in a compact handheld instrument
• Compatible with all Ophir thermal, photodiode and pyroelectric heads
• Soft keys, menu driven, laser tune function
• Screen Graphics

Nova II Displays

• Compatible with all Ophir thermopile, pyroelectric and photodiode detectors
• Large, high definition LCD display
• Both digital and analog needle display
• USB and RS232 output to PC with Statistics package
• Analog output
• Soft keys and menu driven functions with on line help
• Log every data point at >1000Hz with pyroelectric heads
• Non-volatile data storage up to 50,000 points

LaserStar Display

• Two models available: dual and single channel
• Single channel model can be upgraded to dual channel
• Compatible with all Ophir thermal, photodiode, pyroelectric and RP heads
• Screen graphics

PC Interfaces

• PC Interfaces Compact Juno USB Interface that turns your PC into an Ophir power & energy meter.
• Quasar – Wireless Power and Energy Meter
• Pulsar: you can connect up to 4 sensors to each box, monitor each pulse at up to 20KHz
• USB Interface: you can connect one or several sensors to the PC

you can measure both long pulses up to 10mS and have a high repetition rate up to 4KHz in the same detector head. The pulsed detectors also provide sensitivity down to 100pJ .

Main Features:
• Built-in wavelength correction
  
• Spectral range from 0.15 to 20μm
• Pulse rate to 4000Hz (PE10 series)
  
• Energy measurement to 10pJ (PD10-pJ)
  
• Diffuser models for high energy YAG / Holmuim /Erbium lasers
  
• Versatility: Measurements of very long and very short pulses
  
• Measurement from nW to kW, μJ to 2000 μJ with appropriate heads

Moreover, the OEM meters are the principal products used in medical and industrial laser systems.

The thermal OEM heads are compact, self-contained laser power meters with built-in amplifiers. They are easy to install and give a calibrated voltage proportional to power. They all contain electronics needed including a speed up circuit to increase the speed of response of the head to the order of 1s, 0-95%.

Ophir manufactures three main types of pyroelectric OEM heads:

• Low profile pyro heads with no electrics
  
• Low profile smart heads to be used with smart displays
  
• Compact pyroelectric heads with built-in amplifiers and signal conditioners

Main Features:

• The highest damage threshold in the industry
  
• Models for 1500W, 5000W and 10KW for high power laser measurement
  
• LP coating that can withstand up to 6KW/cm2 (at maximum rated head power)
  
• Energy damage threshold up to 250J/cm2
  
• Single pulse energy measurement up to 600 joules
  
• Sensitive meters to measure power down to 40µw and energy down to 7µj
  
• Fibre optics adapters & Accessories for thermal heads